Model No. NST-IPX-XM4S | ||
System Module | System structure | Embedded RTOS,dual-core 32bit DSP(XM530V200),pure hard compression ,watch dog |
Sensor | 4.0M 1/2.8"SC5239S Low illumination CMOS sensor, color 0.01Lux@F1.2, black/white 0.001Lux@F1.2 | |
Video compression | H.265+(Compatible with H.265/H.264), support dual stream, AVI;0.1M~8Mpbs variable;1~30f/s variable | |
Image output | Main stream: 4MP 2560*1440@18fps;3MP 2304*1296@20fps;2MP 1920*1080@25fps; sub-stream: 800*448@25fps; | |
Shutter | 1/50(1/60) s to 1/10,000s | |
Lens | N/A | |
Day and night | Support IR-CUT, IR-CUT coil has an internal resistance of 20 ohms, the power-on time is less than 200ma, and the voltage is 3.5V-6V | |
Image | Noise reduction | Support 2D/3D |
Wide dynamic | Support digital | |
Auto iris | N/A | |
Interface | Audio compression | G.711, support bidirectional talk,audio&video synchronization |
Audio interface | 1ch input, level:2Vp-p,impedance:1kΩ,support sound pick-up input;1ch output,impedance:16Ω,30mw,support microphone | |
Network interface | 1*RJ45 10/100M adaptive Ethernet port; support RTSP/FTPDHCP/NTP/UPnP etc | |
Extension interface | N/A | |
Singal interface | One photo resistance interface,one IR-CUT interface ,support photo resistance signal and IR-CUT links to IR | |
PTZ | N/A | |
Motor interface | N/A | |
Alarm I/O | N/A | |
WIFI interface | N/A （ Extended support ） | |
Reset interface | N/A | |
SD Card | N/A （ Extended support ） | |
Intelligence | Intelligence analysis | Supporting human detection , face detection, and s upport to customize other intelligent functions |
Other function | Other function | Support WEB,OSD,live video transmission, motion detect and IO alarm, front-end storage/playback/download, and center reminder and image linkage, support FTP capture ； united remote client monitoring software 、 MYEYE;perfect SDK; |
ONVIF | Support | |
Mobile monitoring | Support multiple mobile monitoring （ iOS ， Android ） | |
General | Source Reliability | Comprehensive lightning protection, 7 * 24 hours -10 ℃ ～ 65 ℃ high temperature stable and reliable testing |
Power | DC12V/2A input, power consumption: ≤3W | |
Dimension | 38mm*38mm | |
Other | Support POE power supply, not support any custom, The drive voltage of the light board is at 3.3V | |
Socket | Specific No | Interface Description | Function |
J5 | 1 | IR-CUT | IR-CUT |
2 | IR-CUT | IR-CUT | |
J44 | 1 | W_LED_GPIO0_4 | White light control |
2 | R_LED_GPIO2_0 | Infrared light signal control | |
3 | LED/GPIO6_5 | LED control | |
4 | GND | GND | |
5 | IO/GPIO6_ | Reserved IO | |
6 | IO/GPIO1_7 | Reserved IO | |
J1 | 1 | ETH_LINK_ACT_LED | Indicator light |
2 | ETH_LINK_ACT_LED | Indicator light | |
3 | ETHTX + | ETHTX + | |
4 | ETHTX- | ETHTX- | |
5 | ETHRX + | ETHRX + | |
6 | ETHRX- | ETHRX- | |
7 | GND | GND | |
8 | 12V | 12V input | |
J45 | 1 | MICN | Audio input |
2 | AC_IN | ||
J49 | 1 | SPKN | Audio output |
2 | SPKP |
+86 13570806800
