Steps:

1) Preparation

Download PC CMS Software from Enster website

Link:/download_list/

2) Serial ID

Please refer the Serial ID to our online demo list.

Select the camera’s serial ID(Cloud ID) for viewing. Some Serial ID
as following:

Device Type	Serial ID / Cloud ID
2MP Starlight IPC	67c18fce0194b571
4X Motorize Zoom PTZ	015cdaf70fe8f34c
4.0MP IP Camera	1387f6f85e113d9e
5.0MP IP Camera	f264224eccfef709
2.0MP IP Speed Dome	76db453349b0318e
8CH 5MP NVR	ef06649007e1898e
8CH MH AHD DVR	3636b0108a6f44e1

3) ADD AREA on CMS software

Firstly, we need to “ADD AREA” on CMS. Please do like this:

Open CMS software – “System” – “Device Manager” – “ADD AREA”, Name a
Zone.

Ref.
below picture:

4) ADD DEVICE to the Zone

Then, we need to add device to the zone which we set in last step.
Please do like this:

Choose the Zone – “ADD DEVICE” – “Choose
Cloud” – “Fill in the Serial ID”

Login name: admin, no need password. Then “OK”.

Remind: You can add any of the Serial ID
from the Step 2). For example, if you want to view our 2.0MP Starlight IPC,

then add 67c18fce0194b571.

5) View the Online Demo

After finished last steps, you can view the demo on CMS now.

Double click the device name on left side of CMS, then you can see
the camera icon below(for example as below shows “2.0MP”).

Then double click
the icon(2.0MP) you can see the demo in CMS window. (You can also pull the
camera to any window in CMS as you want).

Download the Manual in PDF: By CMS